Product Description
There is no need to purchase special threaded rods for bonding in cracked concrete - the Pure150-Pro is approved for bonding in the tension zone with normal threaded rods. This relates to huge savings for you, as the special threaded rods cost 8-15 times more. One project saw a saving of almost €18,000 by using Pure150-Pro compared to a competitor!
Pure150-Pro is a dual canister with a 3:1 ratio mix. This means the cartridge fits Hilti® tools, allowing you to switch to the highest quality mortar at a lower price than Hilti® mortars, without going through the logistical nightmare of exchanging your tools - lower prices and better quality without any fuss.
Styrene free and low odour levels mean that PURE150-PRO can be used in unventilated areas - no health and safety issues to slow down your work.
The PURE150-PRO is incredibly safe; it has a 120 minute fire approval rating to satisfy your safety requirements. The ETA-1 approval also covers threaded rods M8-M30, rebar ∅8-∅32, overhead applications, dry, wet and water filled holes and heavy loads. No other product gives you this level of safety! It provides excellent performance in hammer and roughened diamond drilled holes in concrete, and is also recommended for stone, solid brick, sand/lime stone and marble, giving you great diversity.
A note on pure epoxy mortar versus vinylester: Pure epoxy provides up to 30% higher load capacity compared to vinylester anchors (such as AC-100®Pro), but do have a much longer curing time. As a general rule, for heavy/extreme loads in cracked concrete use pure epoxy, but for medium to heavy loads in uncracked concrete and masonry (or when quick curing is required) use vinylester.
Each cartridge comes with one mixing nozzle and one nozzle extension.
Additional Information
SKU | 08481 |
---|---|
Type | PURE150-PRO 385ML |
Substrates | Cracked and uncracked concrete, brick, stone, sand/limestone |
Volume | 385ml |
Canister Type | Dual canister 3:1 ratio |
Gel Time | 5°C: 2 h 10°C: 90 min 20°C: 30 min 30°C: 20 min 40°C: 12 min |
Set Time | 5°C: 50 h (dry), 100 h (wet) 10°C: 30 h (dry), 60 h (wet) 20°C: 10 h (dry), 20 h (wet) 30°C: 6 h (dry), 12 h (wet) 40°C: 4 h (dry), 45 h (wet) |
Drill Diameter for Threaded Rod | M8: 10mm M10: 12mm M12: 14mm M16: 18mm M20: 24mm M24: 28mm M27: 32mm M30: 35mm |
Embedment Depth | M8: 60mm-96mm M10: 60mm-120mm M12: 70mm-144mm M16: 80mm-192mm M20: 90mm-240mm M24: 96mm-288mm M27: 108mm-324mm M30: 120mm-360mm |
Load Capacities | M8: Tension = 900-1380kg, Shear = 860kg M10: Tension = 930-2190kg, Shear = 1310kg M12: Tension = 1170-3190kg, Shear = 1940kg M16: Tension = 1430-5330kg, Shear = 3600kg M20: Tension = 1470-6390kg, Shear = 5600kg M24: Tension = 1620-8400kg, Shear = 8060kg M27: Tension = 1930-10020kg, Shear = 10510kg M30: Tension = 2260-11730kg, Shear = 12800kg |
Installation Tool | CG585PRO (Powers), P 3000-F/3500-F (Hilti) |
Approvals | European Technical Approval-1 (ETA-08/0376) 120 minute Feuerwiderstandsklasse Powers Test Laboratory |
Box Quantity | 1 |
Carton Quantity | 10 |
You may also be interested in the following product(s)
CG585PRO Cartridge Gun
£ 70.94
|
PURE150-PRO Pure Epoxy 585ml
£ 35.91
|
PURE150-PRO Pure Epoxy 1400ml
£ 80.76
|
PURE-2K Pure Epoxy 400ml
£ 27.96
|