Product Description
The AC100-EXPRESS is a specially designed vinylester anchor with all the great benefits of the AC100 PRO but with a far quicker curing time. This is especially useful in cold conditions, which otherwise would result in extensive curing times. Faster curing means you get your job done faster, saving you time and money. As with the AC100-PRO, the AC100-EXPRESS is styrene and Volatile Organic Compound (VOC) free for your safety.
The AC100-EXPRESS is fast curing, and designed for a wide range of weather conditions to get you finished quicker. It has a general approval from the MIT at the University of Darmstadt, so you can be sure of its high quality. It is particularly suited for masonry and concrete. Applications also include soft common brick to hard marble or granite so can be used across a jobsite, reducing your costs.
The lightweight cartridge and dispensing tool makes those tricky applications (such as working on scaffolding) as easy and safe as possible. The mortar is a strong, non-sag adhesive, so is ideal for both horizontal and vertical applications for your convenience. The
cartridge is formed from engineered plastic to give optimum shelf life and can be sealed after use, reducing wastage and cutting your costs. The mortar has been subjected to extreme resistance testing over a 12 month period to ensure that you are provided with the highest quality product - certified resistant to a number of chemicals including alkali media. The dispensing tool provides even, consistent pressure, eliminating the air bubbles that would necessitate reapplication and is wear resistant.
The cartridges also fit Spit and Fischer’s dispensers, so you can use the best quality adhesives without needing to change your tools if you don’t want to. Powers AC100-EXPRESS is the mortar you turn to when speed is of the essence - no other chemical anchor gets you finished faster.
N.b. The AC100-EXPRESS is not recommended for use in temperatures exceeding 35°C, as the gel time is too little to ensure a safe fix of the anchor.
Each cartridge comes with one mixing nozzle.
The AC100-EXPRESS is fast curing, and designed for a wide range of weather conditions to get you finished quicker. It has a general approval from the MIT at the University of Darmstadt, so you can be sure of its high quality. It is particularly suited for masonry and concrete. Applications also include soft common brick to hard marble or granite so can be used across a jobsite, reducing your costs.
The lightweight cartridge and dispensing tool makes those tricky applications (such as working on scaffolding) as easy and safe as possible. The mortar is a strong, non-sag adhesive, so is ideal for both horizontal and vertical applications for your convenience. The
cartridge is formed from engineered plastic to give optimum shelf life and can be sealed after use, reducing wastage and cutting your costs. The mortar has been subjected to extreme resistance testing over a 12 month period to ensure that you are provided with the highest quality product - certified resistant to a number of chemicals including alkali media. The dispensing tool provides even, consistent pressure, eliminating the air bubbles that would necessitate reapplication and is wear resistant.
The cartridges also fit Spit and Fischer’s dispensers, so you can use the best quality adhesives without needing to change your tools if you don’t want to. Powers AC100-EXPRESS is the mortar you turn to when speed is of the essence - no other chemical anchor gets you finished faster.
N.b. The AC100-EXPRESS is not recommended for use in temperatures exceeding 35°C, as the gel time is too little to ensure a safe fix of the anchor.
Each cartridge comes with one mixing nozzle.
Additional Information
SKU | 08489 |
---|---|
Type | AC100-EXPRESS 410ML |
Substrates | Concrete, brick, masonry, sand/limestone |
Volume | 410ml |
Canister Type | Two part adhesive cartridge |
Gel Time | -5°C: 40 min 0°C: 20 min 5°C: 25 min 10°C 6 min 20°C: 3 min 30°C: 2 min 35°C: 1 min |
Set Time | -5°C: 3 h dry, 6 h wet 0°C: 1.5 h dry, 3 h wet 5°C: 1 h dry, 2 h wet 10°C: 40 min dry, 80 min wet 20°C: 20 min dry, 40 min wet 30°C: 10min dry, 20 min wet 35°C: 8 min dry, 16 min wet |
Drill Diameter for Threaded Rod | M8: 10mm M10: 12mm M12: 14mm M16: 18mm M20: 24mm |
Embedment Depth | M8: 80mm M10: 90mm M12: 110mm M16: 125mm M20: 170mm |
Load Capacities | M8: Tension =730kg , Shear = 510kg M10: Tension = 1110kg, Shear = 860kg M12: Tension = 1390kg, Shear = 1200kg M16: Tension = 1940kg, Shear = 2230kg M20: Tension = 2510kg, Shear = 3490kg |
Installation Tool | CG410, CG410PRO, CGPNEUM410 |
Approvals | |
Box Quantity | 1 |
Carton Quantity | 15 |
You may also be interested in the following product(s)
AC100-PRO Vinylester Mortar 410ml
£ 23.30
|
CG410 Cartridge Gun
£ 28.78
|
AC100-PRO Vinylester Mortar 360ml
£ 22.36
|
AC100-NORDIC Vinylester Mortar 410ml
£ 23.30
|