Product Description
The AC150 PRO is a specially designed vinylester anchor for use with heavy loads in SDS and hammer drilled holes. Based on the bestselling AC100-PRO mortar, Powers have listened to your desires and redesigned the cartirdge and formula so that it will fit Hilti tools, thanks to the new 3:1 cartridge ratio. This means that you can get the best and most economic vinylester anchor without having to swap your Hilti tools. Just as with the AC100-PRO, this mortar is styrene and Volatile Organic Compound (VOC) free for your safety. This is a multi purpose anchor fitting Hilti tools with the strong bond you need.
The AC150-PRO is fast curing, and designed for a wide range of weather conditions to get you finished quicker. It has ETA-7 approval, and is undergoing ETA-7 approval for water filled holes, guaranteeing the quality other brands cannot provide. It is particularly suited for masonry and concrete. Applications also include soft common brick to hard marble or granite so can be used across a jobsite, reducing your costs.
The lightweight cartridge and dispensing tool makes those tricky applications (such as working on scaffolding) as easy and safe as possible. The mortar is a strong, non-sag adhesive, so is ideal for both horizontal and vertical applications for your convenience. The
cartridge is formed from engineered plastic to give optimum shelf life and can be sealed after use, reducing wastage and cutting your costs. The mortar has been subjected to extreme resistance testing over a 12 month period to ensure that you are provided with the highest quality product - certified resistant to a number of chemicals including alkali media. The dispensing tool provides even, consistent pressure, eliminating the air bubbles that would necessitate reapplication and is wear resistant.
The cartridges also fit Hilti dispensers, thanks to the new, 3:1 ratio, so you can use the best quality adhesives without needing to change your tools if you don’t want to. Powers AC150-PRO is fire resistant, environmentally friendly and ETA-7 certified for uncracked concrete - the quality doesn’t get any better than this!
Each cartridge comes with one mixing nozzle.
The AC150-PRO is fast curing, and designed for a wide range of weather conditions to get you finished quicker. It has ETA-7 approval, and is undergoing ETA-7 approval for water filled holes, guaranteeing the quality other brands cannot provide. It is particularly suited for masonry and concrete. Applications also include soft common brick to hard marble or granite so can be used across a jobsite, reducing your costs.
The lightweight cartridge and dispensing tool makes those tricky applications (such as working on scaffolding) as easy and safe as possible. The mortar is a strong, non-sag adhesive, so is ideal for both horizontal and vertical applications for your convenience. The
cartridge is formed from engineered plastic to give optimum shelf life and can be sealed after use, reducing wastage and cutting your costs. The mortar has been subjected to extreme resistance testing over a 12 month period to ensure that you are provided with the highest quality product - certified resistant to a number of chemicals including alkali media. The dispensing tool provides even, consistent pressure, eliminating the air bubbles that would necessitate reapplication and is wear resistant.
The cartridges also fit Hilti dispensers, thanks to the new, 3:1 ratio, so you can use the best quality adhesives without needing to change your tools if you don’t want to. Powers AC150-PRO is fire resistant, environmentally friendly and ETA-7 certified for uncracked concrete - the quality doesn’t get any better than this!
Each cartridge comes with one mixing nozzle.
Additional Information
SKU | 08491 |
---|---|
Type | AC150-PRO 385ML |
Substrates | Concrete, brick, masonry, sand/limestone |
Volume | 385ml |
Canister Type | Two part 3:1 ratio cartridge |
Gel Time | -5°C: 90 min 0°C: 45 min 5°C: 25 min 10°C: 15 min 20°C: 6 min 30°C: 4 min 35°C: 2 min 40°C: 1.5 min |
Set Time | -5°C: 24 h dry, 48 h wet 0°C: 12 h dry, 24 h wet 5°C: 5 h dry, 10 h wet 10°C: 1.5 h dry, 3 h wet 20°C: 45 min dry, 90 min wet 30°C: 25 min dry, 50 min wet 35°C: 20 min dry, 40 min wet 40°C: 15 min dry, 30 min wet |
Drill Diameter for Threaded Rod | M8: 10mm M10: 12mm M12: 14mm M16: 18mm |
Embedment Depth | M8: 60mm-95mm M10: 60mm-120mm M12: 70mm-145mm M16: 80mm-190mm |
Load Capacities | M8: Tension =600-950kg , Shear = 850kg M10: Tension = 750-1500kg, Shear =1310kg M12: Tension = 940-1950kg, Shear = 1940kg M16: Tension = 1280-3030kg, Shear = 3600kg |
Installation Tool | CG585PRO |
Approvals | EuropeanTechnical Approval Option 7 (ETA-08/0378 Feuerwiderstandsklasse 120 Minute Powers Test Laboratory |
Box Quantity | 1 |
Carton Quantity | 10 |
You may also be interested in the following product(s)
CG585PRO Cartridge Gun
£ 70.94
|
AC150-PRO Vinylester Mortar 585ml
£ 31.24
|
AC150-PRO Vinylester Mortar 1400ml
£ 70.25
|
AC100-PRO Vinylester Mortar 360ml
£ 22.36
|