Product Description
To stand up to the power of a powder actuated tool, powder pins need to be tough. That is why the pins for the P3500 has a 3.7mm shank diameter, and a wide head diameter (7.6mm) gives the pins a high pullover value.
The pins come with a plastic collar. When fired, the collar compresses down into a washer, giving a greater surface contact area for higher pullover strength whilst maintaining a highly finished appearance.
The washered pins have a 22mm steel washer attached. These are ideal for attaching wire lathe to concrete or steel, but also work well as a general purpose washer. The washered pins are available in two lengths; 25mm and 37mm.
The pins fit a variety of other tools:
TS750P, TS60P, S75A, S75, DX350, BETO200, P200 and P60.
The pins come with a plastic collar. When fired, the collar compresses down into a washer, giving a greater surface contact area for higher pullover strength whilst maintaining a highly finished appearance.
The washered pins have a 22mm steel washer attached. These are ideal for attaching wire lathe to concrete or steel, but also work well as a general purpose washer. The washered pins are available in two lengths; 25mm and 37mm.
The pins fit a variety of other tools:
TS750P, TS60P, S75A, S75, DX350, BETO200, P200 and P60.
Additional Information
SKU | 50090 |
---|---|
Type | P25W |
Nail Length | 25mm |
Shank Diameter | 3.7mm |
Collation Type | Single Pins |
Powder Loads | Green, Yellow, Red strips (sold separately) |
Box Quantity | 100 |
Carton Quantity | 1000 |
You may also be interested in the following product(s)
P3500 Powder NailerRegular Price: £ 303.38 Special Price: £ 214.99 |