Product Description
Powers SDS wire brushes are durable metal brushes designed for use in a range of embedment drill holes with an SDS drill. This makes it quick and easy to clean out the drill hole. Cleaning your drill hole is important; ETA approvals only apply with anchors when the drill hole has been cleaned correctly. Furthermore, holes which have not been cleaned at all can have their load bearing capacities reduced by as much as 60%. To get the best performance out of your anchor, make sure your drill hole twice with a wire brush and blow pump.
The SDS Connector is the vital component for use with the SDS wire brushes. It attaches to your drill and the brushes screw into it, making it quick and easy to switch between brush sizes. The 300mm extension screws into the SDS Connector and is especially useful for those deeper embedment depths.
The SDS Connector is the vital component for use with the SDS wire brushes. It attaches to your drill and the brushes screw into it, making it quick and easy to switch between brush sizes. The 300mm extension screws into the SDS Connector and is especially useful for those deeper embedment depths.
Additional Information
SKU | 23327 |
---|---|
Type | BRSDS EXTENSION |
Box Quantity | 1 |
Carton Quantity | 20 |
You may also be interested in the following product(s)
SDS Brush Connector
£ 5.26
|
SDS Brush 12mm
£ 8.10
|
SDS Brush 14mm
£ 8.10
|
Blow Bulb
£ 6.98
|