Product Description
The HWA is a sleeve type anchor that is especially designed for temporary applications into hollow drywall. The anchor comes complete with bolt and sleeve, and once the sleeve has been installed into the wall the bolt can be removed as many times as necessary without influencing load values.
Installation takes a little longer than with some other anchors, but the advantage of being able to quickly and safely remove fixtures as often as required offsets this. Powers have developed a setting tool for the HWA to speed up installation.
The HWA can also carry higher loads than many other drywall anchors, allowing it for use with a range of fixtures. It is especially useful for heavy fixtures such as radiators, large mirrors and anything where the fixture might need to be removed. This prevents a significant advantage over anchors such as the Spring Toggle, where if you remove the bolt the toggle will fall back behind the plasterboard, necessitating a new anchor to be installed.
Powers hollow wall anchors are powerful and inexpensively priced. Give them a try today.
Installation takes a little longer than with some other anchors, but the advantage of being able to quickly and safely remove fixtures as often as required offsets this. Powers have developed a setting tool for the HWA to speed up installation.
The HWA can also carry higher loads than many other drywall anchors, allowing it for use with a range of fixtures. It is especially useful for heavy fixtures such as radiators, large mirrors and anything where the fixture might need to be removed. This prevents a significant advantage over anchors such as the Spring Toggle, where if you remove the bolt the toggle will fall back behind the plasterboard, necessitating a new anchor to be installed.
Powers hollow wall anchors are powerful and inexpensively priced. Give them a try today.
Additional Information
SKU | 02113 |
---|---|
Type | HWA570 |
Applications | Radiator brackets Shelving and cabinets HVAC fixtures Electrical and plumbing fixtures |
Substrates | Gypsumboard, chipboard |
Anchor Type | Drywall sleeve anchor with bolt |
Length | 70mm |
Width | M5 bolt |
Embedment Depth | Max. 25mm |
Fixture Thickness | Max. 31mm |
Installation Tool | Drill hole, insert anchor, remove bolt with setting tool, install bolt through fixture with screwdriver |
Drill Diameter | 10mm |
Load Capacities in Gypsum Board | Tension = 20kg, Shear = 20kg |
Approvals | Powers Test Laboratory |
Box Quantity | 50 |
Carton Quantity | 500 |
You may also be interested in the following product(s)
Hollow Wall Anchor 5x60
£ 18.17
|
Hollow Wall Anchor 6x60
£ 22.96
|
Hollow Wall Anchor Setting Tool
£ 16.74
|
Strap-Toggle M5
£ 22.01
|