Product Description
The Zip-Toggle® is a self drilling hollow gypsum board toggle anchor designed to provide superior performance without the need to pre-drill larger diameter holes. The pack comes complete with its own 50mm screws.
The Zip-Toggle® is a fast and powerful alternative to toggle-bolts, with installation up to 5 times faster. Installation is easy: drill the Zip Toggle® in using a manual or electric screwdriver, place fixture over, slide screw through until it activates the toggle and then continue to drive until the toggle is sitting firmly against the board. This gives you high strength with a small penetration hole, which allows for a more finished appearance. The Zip-Toggle® can be used in most standard hollow plasterboard walls, and represents a great saving in time and ease when compared to other hollow wall anchors such as spring toggles. Furthermore, as the Zip-Toggle® is self-tapping, its penetration hole is the same diameter as the anchor itself: this gives a higher aesthetic finish than other toggle anchors which normally require a larger hole for installation. It is ideal for heavier fixtures. A choice of finishes - nylon or metal - gives this great anchor added diversity. Fast installation times and Dynamifix’s low prices gets your job done before time without emptying your pockets.
The Zip-Toggle® is a fast and powerful alternative to toggle-bolts, with installation up to 5 times faster. Installation is easy: drill the Zip Toggle® in using a manual or electric screwdriver, place fixture over, slide screw through until it activates the toggle and then continue to drive until the toggle is sitting firmly against the board. This gives you high strength with a small penetration hole, which allows for a more finished appearance. The Zip-Toggle® can be used in most standard hollow plasterboard walls, and represents a great saving in time and ease when compared to other hollow wall anchors such as spring toggles. Furthermore, as the Zip-Toggle® is self-tapping, its penetration hole is the same diameter as the anchor itself: this gives a higher aesthetic finish than other toggle anchors which normally require a larger hole for installation. It is ideal for heavier fixtures. A choice of finishes - nylon or metal - gives this great anchor added diversity. Fast installation times and Dynamifix’s low prices gets your job done before time without emptying your pockets.
Additional Information
SKU | 02290 |
---|---|
Type | ZIP-TOGGLE/NYLON |
Applications | Mounting electrical fixtures Miscellaneous hardware Brackets and light shelving |
Substrates | Hollow plasterboard |
Anchor Type | Toggle anchor with screw |
Length | 50mm |
Wallboard Thickness | 10-13mm |
Installation Tool | Screwdriver |
Load Capacities in Gypsum Board | 10mm: Tension = 8kg, Shear = 8kg 13mm: Tension = 16kg, Shear = 16kg |
Approvals | Powers Test Laboratory |
Box Quantity | 50 |
Carton Quantity | 250 |
You may also be interested in the following product(s)
Zip-Toggle Metal
£ 32.30
|
Strap-Toggle M5
£ 22.01
|
Spring-Toggle 5x50
£ 7.59
|
Wall-Dog Screwbolt Pan 32mm
£ 12.50
|