Product Description
Wedge anchors are fast and safe fixings with a huge range of applications for medium loads. Before now, if you wanted a wedge anchor with ETA approval you had to look to Hilti®, and pay extra for the privilege.
The Powers® PBZ-PRO is a redesign of the original PBZ wedge anchor. Safer than ever before, it now boasts full ETA approval as well as a 120 minute fire approval rating. This makes it the safest wedge anchor available, giving you the greatest surety of mind. The expansion fixing gives you great strength with a small, ergonomic anchor design, that gives you the flexibility to apply it anywhere. It can be installed into cracked and uncracked concrete and masonry, which allows you to use it wherever you need to. The simple installation procedure saves you time and effort: simply drill, insert, and hammer the wedge piece until flush with head. Saving you time saves you money! The PBZ-PRO requires a small drill bit with a shallow embedment depth, and can be installed close to edges, making installation easier than ever for you. The PBZ-PRO is available in 2 lengths, 35mm and 65mm, to give you a range of thicknesses of fixtures (up to 35mm), allowing it to be installed through a huge range of fixtures. Comparable design values to the Hilti® DBZ lets you make the swap without compromising on strength or quality, ensuring the success of your project.
The Powers® PBZ-PRO is a redesign of the original PBZ wedge anchor. Safer than ever before, it now boasts full ETA approval as well as a 120 minute fire approval rating. This makes it the safest wedge anchor available, giving you the greatest surety of mind. The expansion fixing gives you great strength with a small, ergonomic anchor design, that gives you the flexibility to apply it anywhere. It can be installed into cracked and uncracked concrete and masonry, which allows you to use it wherever you need to. The simple installation procedure saves you time and effort: simply drill, insert, and hammer the wedge piece until flush with head. Saving you time saves you money! The PBZ-PRO requires a small drill bit with a shallow embedment depth, and can be installed close to edges, making installation easier than ever for you. The PBZ-PRO is available in 2 lengths, 35mm and 65mm, to give you a range of thicknesses of fixtures (up to 35mm), allowing it to be installed through a huge range of fixtures. Comparable design values to the Hilti® DBZ lets you make the swap without compromising on strength or quality, ensuring the success of your project.
Additional Information
SKU | 02838 |
---|---|
Type | PBZ-PRO6x5/65 |
Applications | Fixing lattice work Steel sheets Synthetic ducts to concrete ceilings HVAC equipment Fixtures such as brackets, wall mounted units etc. |
Substrates | All concrete types (including cracked) and masonry |
Anchor Type | Wedge anchor |
Length | 65mm |
Width | 6mm |
Head width | 17mm |
Embedment Depth | 30mm |
Fixture Thickness | 35mm |
Installation Tool | Place through fixture into pre-drilled hole and hammer head until flush |
Drill Diameter | 6mm |
Load Capacities | Tension = 140kg, Shear = 140kg |
Approvals | Powers Test Laboratory European Technical Approval-1 (09/0011) 120 Minute Fire Approval Rating (R0314) |
Box Quantity | 100 |
Carton Quantity | 1000 |
You may also be interested in the following product(s)
PBZ-PRO 6x35
£ 22.05
|
ZNI Nail-In Anchor 6x30
£ 17.19
|
MNI Nail-In Anchor 6x30
£ 11.75
|