Product Description
The Powers Nail-It packs provide the most comprehensive range of nails for wood-to-wood first fixings. The Nail-It packs come in a variety of lengths (50-90mm), with different features and finishes to suit any project and any job, indoors or outdoors.
The 34° nails are collated with strips of paper which blow away when fired. This makes them a far more environmental choice than plastic collated nails. Each nail's head is coated in a film of resin. This lubricates the nail on entry, allowing for better penetration, and the friction of entry melts the resin. This bonds with the wood and hardens, giving an even higher pullover value.
The nails come with two shank types; smooth (S) or ring (R). Ringed nails has a series of rings along the shank; these provide extra grip in the wood so are best suited for overhead or vertical applications. Smooth nails are less expensive and are best suited for underfoot applications.
These nails are made from A2 stainless steel. Although more expensive, this gives them an even higher corrosion resistance than hot-dip galvanisation, and so are able to withstand complete submersion.
Powers 34° CDH nails and gas also fit the Paslode IM350, and are guaranteed by the manufacturer to work in your Paslode tool. Not only are these superior nails, they are also cheaper, so there is no need to change your tool to save you money.
The 34° nails are collated with strips of paper which blow away when fired. This makes them a far more environmental choice than plastic collated nails. Each nail's head is coated in a film of resin. This lubricates the nail on entry, allowing for better penetration, and the friction of entry melts the resin. This bonds with the wood and hardens, giving an even higher pullover value.
The nails come with two shank types; smooth (S) or ring (R). Ringed nails has a series of rings along the shank; these provide extra grip in the wood so are best suited for overhead or vertical applications. Smooth nails are less expensive and are best suited for underfoot applications.
These nails are made from A2 stainless steel. Although more expensive, this gives them an even higher corrosion resistance than hot-dip galvanisation, and so are able to withstand complete submersion.
Powers 34° CDH nails and gas also fit the Paslode IM350, and are guaranteed by the manufacturer to work in your Paslode tool. Not only are these superior nails, they are also cheaper, so there is no need to change your tool to save you money.
Additional Information
SKU | 62040 |
---|---|
Type | DH51x28-R-SS |
Substrates | Wood on wood ONLY |
Nail Length | 51mm |
Shank Diameter | 2.8mm |
Shank Type | Ring Stainless Steel |
Fuel Cell | Red fuel cell, up to 1100 shots |
Angle | 34° |
Collation Type | Paper collated strips of 20 nails with clipped heads |
Approvals | DIN 1052-2 |
Box Quantity | 5000 + 5 red fuel cells |
You may also be interested in the following product(s)
Powers Nail-It W3-34CDH Wood Nailer
£ 461.55
|
51x28 S-BR 34° D Head nail and fuel pack
£ 37.75
|
51x28 R-BR 34° D Head nail and fuel pack
£ 42.54
|
51x28 S-EL 34° D Head nail and fuel pack
£ 69.68
|