Product Description
To stand up to the power of a powder actuated tool, powder pins need to be tough. That is why the pins for the P3500 has a 3.7mm shank diameter, and a wide head diameter (7.6mm) gives the pins a high pullover value.
The pins come with a plastic collar. When fired, the collar compresses down into a washer, giving a greater surface contact area for higher pullover strength whilst maintaining a highly finished appearance.
The top hat pins are designed for use with thin steel to prevent the pin from blowing completely through. The top hat pins are available in two lengths; 16mm and 25mm.
The pins fit a variety of other tools:
TS750P, TS60P, S75A, S75, DX350, BETO200, P200 and P60.
The pins come with a plastic collar. When fired, the collar compresses down into a washer, giving a greater surface contact area for higher pullover strength whilst maintaining a highly finished appearance.
The top hat pins are designed for use with thin steel to prevent the pin from blowing completely through. The top hat pins are available in two lengths; 16mm and 25mm.
The pins fit a variety of other tools:
TS750P, TS60P, S75A, S75, DX350, BETO200, P200 and P60.
Additional Information
SKU | 50138 |
---|---|
Type | P16TH |
Nail Length | 16mm |
Shank Diameter | 3.7mm |
Collation Type | Single Pins |
Powder Loads | Green, Yellow, Red strips (sold separately) |
Box Quantity | 100 |
Carton Quantity | 5000 |
You may also be interested in the following product(s)
P3500 Powder NailerRegular Price: £ 303.38 Special Price: £ 214.99 |