Product Description
The Strap Toggle™ is a unique type of toggle system, consisting of a carbon steel wing and a locking cap/ratchet leg assembly molded from engineered plastic. The precision design allows for heavy loads into plasterboard, wallboard and hollow block.
In comparison to traditional toggles, the Strap Toggle™ is fast, easy to set (no fixture or screw required to set it) and requires a smaller hole. Installation is not difficult: pre-drill a hole into the base material and compress the strap to pass the toggle through the wall. Once it is through expand the strap. This allows the toggle to sit parallel with the wall. Snap the strap off with your fingers at the wall, and its legs will hold it in place. Place the fixture and install a screw through it. This individual design gives you great strength with a fast and easy installation. The design of the Strap Toggle™ allows for a range of fixture sizes and wall thicknesses, and its high load bearing capacities make it suitable where otherwise you might have to consider a more expensive and larger anchor. The bolt and fixture can be removed and reinstalled as often as required without affecting the strength. Although a slightly more expensive anchor per se than other toggles, in the situations where it is required you will find it is the fastest and most cost effective solution.
In comparison to traditional toggles, the Strap Toggle™ is fast, easy to set (no fixture or screw required to set it) and requires a smaller hole. Installation is not difficult: pre-drill a hole into the base material and compress the strap to pass the toggle through the wall. Once it is through expand the strap. This allows the toggle to sit parallel with the wall. Snap the strap off with your fingers at the wall, and its legs will hold it in place. Place the fixture and install a screw through it. This individual design gives you great strength with a fast and easy installation. The design of the Strap Toggle™ allows for a range of fixture sizes and wall thicknesses, and its high load bearing capacities make it suitable where otherwise you might have to consider a more expensive and larger anchor. The bolt and fixture can be removed and reinstalled as often as required without affecting the strength. Although a slightly more expensive anchor per se than other toggles, in the situations where it is required you will find it is the fastest and most cost effective solution.
Additional Information
SKU | 04052 |
---|---|
Type | ST5 |
Applications | Fixtures into thick walls Temporary applications (toggle remains in place if screw is removed All fixture types into walls |
Substrates | Gypsumboard, Hollow core concrete, Chipboard |
Anchor Type | Toggle with plastic setting strap |
Wallboard Thickness | 75mm |
Installation Tool | Drill, then use strap to set toggle in place |
Drill Diameter | 12mm |
Load Capacities | Tension = 18kg, Shear = 18kg |
Approvals | Powers Test Laboratory |
Box Quantity | 50 |
Carton Quantity | 300 |
You may also be interested in the following product(s)
Strap-Toggle M6
£ 22.01
|
Strap-Toggle M8
£ 22.01
|
Zip-Toggle Metal
£ 32.30
|
Spring-Toggle 5x50
£ 7.59
|