Product Description
The Spring Toggle is a spring wing type hollow wall anchor designed for use in block, wallboard and other hollow base materials.
The Spring Toggle is fast to install as bolt and anchor are included in one. Place the Spring Toggle through the fixture and slide the wings through a pre-drilled hole. Pull back on the fixture to hold the wings tight against the board, and tighten the bolt until flush. The wide wings spread the load over a larger area than other anchor types, giving you a high pullout strength. A key advantage of the Spring Toggle is that it can be installed overhead in weaker suspended ceilings and drywall panels. The design of the anchor does require a larger drill hole than other fixings, so is ideally suited to permanent installations where a fast and easy installation will give you high performance over a long time period.
The Spring Toggle is fast to install as bolt and anchor are included in one. Place the Spring Toggle through the fixture and slide the wings through a pre-drilled hole. Pull back on the fixture to hold the wings tight against the board, and tighten the bolt until flush. The wide wings spread the load over a larger area than other anchor types, giving you a high pullout strength. A key advantage of the Spring Toggle is that it can be installed overhead in weaker suspended ceilings and drywall panels. The design of the anchor does require a larger drill hole than other fixings, so is ideally suited to permanent installations where a fast and easy installation will give you high performance over a long time period.
Additional Information
SKU | 04231 |
---|---|
Type | ST6x75 |
Applications | Permanent applications into hollow walls (bolt cannot be removed without losing toggle) Radiator brackets Suspended lighting into weak ceilings Shelves and cabinets Best suited for heavier loads into hollow walls |
Substrates | Gypsumboard, Chipboard |
Anchor Type | Bolt with spring toggle attachment |
Length | 75mm bolt |
Width | M6 bolt |
Embedment Depth | Bolt needs minimum 45mm installation depth |
Installation Tool | Drill through board, place bolt through fixture, put toggle on end of bolt, slide through hole and tighten. |
Drill Diameter | 18mm |
Load Capacities | Tension = 30kg, Shear = 30kg |
Approvals | Powers Test Laboratory |
Box Quantity | 50 |
Carton Quantity | 500 |
You may also be interested in the following product(s)
Spring-Toggle 5x50
£ 7.59
|
Spring-Toggle 5x75
£ 8.18
|
Spring-Toggle 5x100
£ 8.95
|
Zip-Toggle Metal
£ 32.30
|